Jeep Wrangler Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Ok i have read a lot of thread on tires and not to much on rims.So hears what i have !I have been redoing a 95 yj 4cl 5 speed.. I'm ready to order new tires and rims.It has the original rims that suck and i want to put cragar Nomads on it that look like the rims i had on my renegades back in the days.Now im running stock suspension no lift and want to go 31 x 10 1.5 tires, my off roading days for the most part are over so manley for looks not that i wont do some dumb shit with it.Now will 8 inch rim stick out to far into the stock fender flares as i like the look of deep rims or should 7s be fine.....Any input would be appreciated...
 

·
Registered
Joined
·
2,083 Posts
Pretty sure the stock wheels don’t have the same offset as what most people swap too and reason why they stick out of fender flares. I have 8” with 3.75” of back spacing IMG_0631.jpg


1992, 4.0,5 spd, BDS 4.5 heavy duty lift, jb conversions ss sye, 8.8 with ARB, Aussie front, tj shafts, dual dia.brake booster, 33” bfg a/t
 
  • Like
Reactions: gordwa

·
Registered
Joined
·
9,000 Posts
When I had 31" tsl's on stock wheels the side lugs would just barely rub the leafs at full lock... not enough to be a problem but a washer under each steering stop would eliminate it.
 
1 - 5 of 5 Posts
Top