The culprits' cure, can be seen here....90degree PVC wallered out to snugly slip over drain tube...results.... No more water on passenger side floorboard. So disgusted! Fresh flat black on floor board and frame, I looked at the drivers side real well, not so well on the passenger side. This leak rotted the body mount out, on passenger side, passenger side frame is pretty bad, in between the controlling arms. Wondering what to do??? First thoughts are to sell it! lol but it's mine! It's got 83,000 miles on it, runs great, 17mpg, very minor body rust on back driver corner, 4 inch long area with a few bubbles at the seam. ? Any suggestions? I figure I should get the cancer cut out soon, or it will take over? Anyone no of anyone around louisville ky, that would tackle this task? Is it worth messing with, or have I got ten years left on it, and I'll replace the jeep before then.....anyway, I am disabled from two back surgeries, last one was 10-22-10 I need hip surgery on a torn labral, I can not tackle much anymore. I used to be a cnc machinist, I still have a haas sl-10 and a tm-2, in my fathers shed. He runs some production on them, I ain't been out there to work, in two years! Anyway, advise is appreciated. My heads not that clear right now.