Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 16 of 16 Posts

·
Registered
Joined
·
392 Posts
Discussion Starter · #12 ·
Does the cowl cover come off easily to install the snorkel?
Was there any cutting or drilling required?
Thanks
Everything comes apart pretty easily. You have to make one small cut on top of the fender. You will want a little touch up paint to cover the bare metal.
 

·
Registered
Joined
·
392 Posts
Discussion Starter · #15 ·
Metalcloak front disconnects and RK rear upper and lower CA's installed this morning.
 

·
Registered
Joined
·
392 Posts
Discussion Starter · #16 ·
Almost everything is installed with the exception of the Barricade front skid. The skid is not designed to work with my front bumper and will need to be modified to work. I knew this when I ordered it. Alignment was completed early last week. My wife drove the jeep for the first time since everything was installed and commented on how much better it rides and handles.
 
1 - 16 of 16 Posts
Top