Jeep Wrangler Forum banner
1 - 1 of 3 Posts

· Retired Moderator
56,953 Posts
There's no set length.
Why did you opt for a adjustable anyways ? 2" lift typically doesn't need correction.

Anyways .... On flat ground. Remove the TB. Shake jeep around. The body should center itself over the axle. Bolt back up and measure.

You want to pick a point on each tire and measure to a common point on the frame. A good spot for me was the spring perch.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.