Jeep Wrangler Forum banner
1 - 2 of 17 Posts

· Registered
240 Posts
Well, I just drove it around for five and a half miles, turned it on and off a couple of times and still no change. Everything keeps dinging and flashing.

I guess I'll see if it fixes itself the next time I go into town. That's a 20 mile trek.

For what it's worth, I still have the stock 130 HU.
the reason i asked about the radio is that apparently the procal uses the radio as part of its authentication process
so if you are using a procal and want to swap the radio you should flash it back to stock then change radios and then reload the procal settings
1 - 2 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.