Jeep Wrangler Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Hello, long story short I was drifting in the snow and slid (not fast at all) into a curb. Hit front right first. I drove it home but the steering wheel was turned almost a half a turn to the left. I looked up on YouTube and it said to adjust the track bar. I tried that and noticed that the wheel I hit was not sticking out past the fender and the other wheel was sticking too far out beyond the fender. I first thought I just simply knocked it out of alignment. Can someone please help. Thanks, I really appreciate it!
 

·
Super Moderator
Joined
·
22,029 Posts
could have bent your track bar, drag ling tie rod etc maybe bent your control arm mounts hard to say without looking. 5000lbs + sliding sideways into a curb generates a lot of force.
 
1 - 2 of 2 Posts
Top