Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
  • Truck seat covers are up to 76% off right now on eBay. Click here for Black! Tan! Multi-coloured! even Camo!
1 - 2 of 2 Posts

·
Registered
Joined
·
878 Posts
Discussion Starter · #1 ·
I currently have one amp powering my 4 tiny speakers and am adding another to power the sub I'm replacing in the center console. The question I have is can I, instead of running a new power wire just splice into the power wire i'm using for the current amp. It's a 10 guage connected directly to the battery with a 30 amp inline fuse. It sure would make my life easier to just splice into the remote turn on wire and the power wire at the other amp. :cool:
 

·
Retired Moderator
Joined
·
4,046 Posts
I don't know what the amperage draw of your amps are. I would say probably run another set of wires off the battery, just off the top of my head. I'm thinking you'll turn your ten gauge wires into marshmallows.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top