Jeep Wrangler Forum banner

Anchor motor/transmission mounts

1428 Views 2 Replies 2 Participants Last post by  wildrnesxperienc
Had to install a new tranny mount on my 04 Unlimited because a bolt on my oe one was stripped. So I thought I'd go ahead and replace the motor mounts too, get fresh rubber in there and maybe reduce some of the feel of the engine roughness. Installed Anchor brand yesterday, they are terrible! Drove it around the neighborhood last night, I never ever felt vibrations like this at idle with the stock mounts. Avoid at all costs! Buy the Mopar ones the rubber must be a lot softer. Mine are on order and will go in ASAP, this is awful. Things in the dash are buzzing!
1 - 3 of 3 Posts
or Brown Dog mounts
It got better as the day went on, but it's still worse than the old OE mounts.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top