Jeep Wrangler Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
73 Posts
Discussion Starter #1
hey there, i have a 93 yj, i just put a 3'' body lift on it. any ideas on how to cover up the gap between the back bumper and cab, and front bumper and grill so the blocks will not show.:eek:
 

·
Registered
Joined
·
8,162 Posts
ya, take off that huge body lift and put on a 3" suspension lift:D

some guys on here have had some good ideas, but i hate how that looks.
 

·
Registered
Joined
·
149 Posts
Go on ebay and searh for Gap Guards, there is a company that makes covers to hide that gap, and they are fairly cheap, $30-40 dollars. Or make your own if you can get steel and cut it yourself
 

·
Registered
Joined
·
79 Posts
No need to buy gap guards for a lot of $$. Go to Home Depot or Lowes to the carpet/flooring section and get the floor level kick panels you see in offices on the wall. They're made of a durable, yet flexible black rubber and are about 5" wide.
 

·
Registered
Joined
·
149 Posts
never thought of that
 

·
Registered
Joined
·
149 Posts
How would you mount it?
 

·
Registered
Joined
·
149 Posts
May have to so i can save some money for a tranny.
 

·
Registered
Joined
·
583 Posts
The rock hard 4x4 rear bumper I just ordered mounts in the factory position or 1" higher that factory for improved exit angles and to compensate for BL. It's not gonna cover that giant canyon you've created, but it's a start.


May have to so i can save some money for a tranny.
You can find one cheap on Dort Highway in Flint, Just look for the girls with the adams apples.....
 
1 - 11 of 11 Posts
Top