Jeep Wrangler Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
2,813 Posts
Good luck on stock axles. the Dana 30 up front will eat unit bearings, brakes, shafts, ball joints and might even bend the housing. the 44 out back wont fair a whole lot better long term.

Drop the damn rig 6 inches of lift is kinda tall. tummy tuck it run some 2 or 3in springs with a highlined hood and fenders
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top