Jeep Wrangler Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
My wife is going to buy me one for my birthday.


image-1876232028.jpg


I'm wondering if it will fit with the MBRP light bar already installed.


image-2492444998.jpg
 

·
Registered
Joined
·
502 Posts
I have that Smittybilt bumper, and I have the Mopar Bar. I had to use a Greenlee hole punch and a grinder and a welder, but I made it fit, and I think it looks great. Oh, wait, you want a picture? Jeez, I don't have one tonight, but I will get one on by tomorrow. If you have a link to the MBRP light bar installation instructions, I can confirm if it will fit, or if it will be a pain in the azz… Also, what year is your Jeep?
 

·
Registered
Joined
·
502 Posts
Yeah, the winch will interfere with the Hella black magics I've got hanging there.

She's a 2011 JKU

http://offcamberfabrications.com/products/instructions/130716.pdf

Thanks for the assist.
Figure 13 shows where the frame and mounting brackets attach to the frame. I've looked at mine, and it looks like you're in luck. I took a photo on my phone that I will attach in the AM, but it looks like you will be able to utilize that light bar with the Smittybilt bumper. I also think you might be able to put a winch in there as long as you remote mount the solenoids.
 

·
Registered
Joined
·
9 Posts
Discussion Starter #7
Thank you so much for the insight.
Once I have hands on the bumper I'll add the install to this thread.
 

·
Registered
Joined
·
9 Posts
Discussion Starter #9
So yeah.
I didn't forget about this thread.
Still haven't received my bumper.
Middle of May I'm told.
 

·
Registered
Joined
·
9 Posts
Discussion Starter #11
Yeah they do.
However 4WD.com had a screamin deal on these ones and I have already spent the bucks on the MBRP bar.
 
1 - 11 of 11 Posts
Top