Jeep Wrangler Forum banner

1 - 4 of 4 Posts

·
Banned
Joined
·
38 Posts
Discussion Starter #1
I just purchase a pair of Aussie Lockers for my 2001 TJ. Dana 30 for the front and Dana 35 for the rear.

Should have em in a couple weeks.

I am just curious if anyone has any thoughts????
Good or Bad.


thanks!!! Todd.
 

·
Registered
Joined
·
2,166 Posts
I just installed one in the front and the hardest part was getting the carrier to stay in the vise good(small vise):D . Also what worked best for me in getting the carrier out of the housing was using two pry bars on a upper and lower ring gear bolt, heres a picture of what Im talking about: http://www.stu-offroad.com/axle/d30seals/seal-5.jpg . and put something soft under it or have someone ready to catch it just in case it falls out fast when you do that.

Here is a couple write-ups that I bookmarked:

http://www.4x4xplor.com/aussielocker.html

http://www.offroadlockers.com/manual40.php/TMfa1d0f/4e25/.html

http://www.jeepforum.com/forum/showthread.php?t=115029

http://mrpistol.tripod.com/id58.html

http://home.off-road.com/~nobucks/locker.html

and a fluid capacity chart:

http://www.getahelmet.com/jeeps/maint/fluids/


I printed out the one from 4x4xplor when i did mine.


Also I can here the clicking sometimes when I turn slowly which isn't that bad but "they" say it goes away after a while. I'm testing it out tonight so I'll tell you how it does offroad.

hope that helps some...


-Matt
 

·
Premium Member
Joined
·
287 Posts
there are multiple aussie lockers in my club. all the owners say they wont wheel with anything else. i am putting them in f/r of my 97 TJ.....
 

·
Registered
Joined
·
1,249 Posts
I just purchase a pair of Aussie Lockers for my 2001 TJ. Dana 30 for the front and Dana 35 for the rear.

Should have em in a couple weeks.

I am just curious if anyone has any thoughts????
Good or Bad.


thanks!!! Todd.
I've heard nothing but good things about the Aussie's. I plan on doing the same thing you are doing, when I re-gear.
 
1 - 4 of 4 Posts
Top