Jeep Wrangler Forum banner
1 - 1 of 7 Posts

· Registered
Joined
·
139 Posts
Unless you plan on doing some severe wheeling, just build up the d20. You'll save money initially and have something that you could sell at a later date if your wheeling needs changed.

I've built 2 cj's with d20's and had very good luck. I used moser 1 piece axles, detroit locker, and trussed the housing.

On a side note, I've got a d60 and a 14 bolt with 5.13's, detroit's, and disk brakes that I would sell.:D
 
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top