Jeep Wrangler Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1

·
Registered
Joined
·
353 Posts
personally i would go with the nylon vs aluminum for just 1 reason steel and aluminum dont get along they fight each other and with a little moisture they carode the aluminum and rust steel faster than the nylon would . i see this (steel vs alum.) alot at work.
 

·
Administrator
Joined
·
12,607 Posts
I run the JKS on another jeep a few years back..no issues, I like it as it replaced the whole bushing not just sticking one on top of the other.
 

·
Registered
Joined
·
40 Posts
I would agree with Jeeperx2 on the dissimilar metal issue. I use the 1" Daystar. They completely replace the whole mount rather than just ad height to the existing ones. I was going to get the color red but some of my Jeep buddies suggested that I get black. They are easier to keep clean and don't look out of place.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #6
thanks, I appreciate all the input and for making the decision alot easier...
 

·
Jack Lives Here!!!
Joined
·
7,760 Posts
I'm running the daystar 1" BL and I agree with the full replacement pucks and not just spacers.
 
1 - 8 of 8 Posts
Top