Jeep Wrangler Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
189 Posts
Discussion Starter · #1 ·
Has anyone done a full bulb location and size work out for all the bulbs in a 1991 YJ?
I want to replace all my bulbs with LED bulbs but hoping someone has already done the ground work.

Fingers crossed!:whistling:

If not I will do it and post a thread for it.
 

·
Premium Member
Joined
·
10,093 Posts

·
Registered
Joined
·
4,757 Posts
Front turn signals .......... 3157

fender parking lights......194

Rear turn signals............. 1157

Reverse lights...............1156

If you switch your lights over to LED, you will need 2 electronic flasher units for the turn signals to blink correctly, 1 is for the turn signals and the other is for the 4way hazard lights. They are 2 prong, and plug into the fuse box.

Those are all the bulb numbers for the external lights that you have now, you can cross them over at any of the LED websites.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top