Jeep Wrangler Forum banner
1 - 2 of 7 Posts

· Registered
Joined
·
4,084 Posts
Are they stock fog lights. If they are not and the bulbs are higher wattage than factory bulbs (55W) then you should not use factory wiring to power them. You need to use relaas to power them but can use the factory wiring to trigger the relay. I run 100w driving lights and 130w Headlights all through separate relays.
 

· Registered
Joined
·
4,084 Posts
Check the bulb wattage. Something is overloading the circuit.
 
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top