Jeep Wrangler Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hey all, sorry if there's a more specific thread where I should be posting this kind of thing, but I'm using mobile so here goes. Recently got my CB all wired up and the SWR & power meter I ordered to tune it just came in, but without a little jumper cable to connect it. If I use a longer cable I have lying around, will that extra length make the calibration inaccurate when I switch back to the connecting antenna cable directly?
 

·
Registered
Joined
·
1,420 Posts
From what I've seen in other threads the length of the jumper doesn't matter.
 

·
Registered
Joined
·
131 Posts
Hey all, sorry if there's a more specific thread where I should be posting this kind of thing, but I'm using mobile so here goes. Recently got my CB all wired up and the SWR & power meter I ordered to tune it just came in, but without a little jumper cable to connect it. If I use a longer cable I have lying around, will that extra length make the calibration inaccurate when I switch back to the connecting antenna cable directly?
I assume you are using one antenna, the jumper will not matter, the only thing you are tuning is the length of the antenna.
 
1 - 3 of 3 Posts
Top