Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 1 of 1 Posts

·
Registered
Joined
·
72 Posts
Discussion Starter · #1 ·
well we have the 305 in and running other than distributor, wires and a couple of odd and end stuff. my old springs were pretty flat and werent but 3/4 in from my front drive shaft, so i got a set of new ones. i am clearing the front drive shaft now by a couple of inches but when i turned in today from making a loop i bottomed out. question is can i add a leaf or two from my old springs and get enough clearance. thanks.
 
1 - 1 of 1 Posts
Top