Jeep Wrangler Forum banner

Cutting front bumper

652 Views 1 Reply 2 Participants Last post by  xcraftllc
I know I have seem people cut the front bumper to make it stubby by ordering caps, but I have also seem some people do it by cutting and plastic welding the ends. Has anyone done this?
1 - 2 of 2 Posts

· Registered
Joined
·
96 Posts
tons of people man, just search some threads, or better (oddly enough) use google images and you'll find pics of jeeps from the threads, that way you get a visual on the mods being discussed with out reading through a ton of crap. In short it woks great for getting stuff out of the way on the trail but a stinger or bull bar with proper shackles is the way to go in the long run. There are some that look good, and some that are more on the functional side. Here's my personal take on it, I went on the side of cheap and functional:

http://www.wranglerforum.com/f33/from-stock-to-stubby-bumper-and-winch-400-a-242024.html
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top