Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
1 - 6 of 6 Posts

·
Registered
Joined
·
1,344 Posts
Discussion Starter · #1 ·
Alright, so my starter went out on me the other day and I today got around to fixing it. Everything is going just fine and then I run across damn E-12 torx bolts, which, of course, I need new tools for. Granted this gives me a perfect excuse to buy new tools, but it's nothing that I would need for any other project. Why can't DC just use normal bolts for stuff?

Ok, I'm done now. :D Just had to vent a little. Starter is on and Jeeps fires up faster than it ever has before. So I'm happy.
 

·
Administrator
Joined
·
12,630 Posts
Hey I replaced my starter a while back, no torx with mine.. but there was this one little bolt that was a PIA. Thus where was the torx on yours?
 

·
WF Graphics Bitch
Joined
·
544 Posts
Mine has the inverted-torx as well on the starter. Don't ask me why DC wouldn't use hex heads on something as trivial as a starter :rolleyes:
 
1 - 6 of 6 Posts
Top