Jeep Wrangler Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
Hi,

Thanks for everyones help in getting power to the inside of my 2010 Rubicon. Now I have a different issue. I bought the Daystar switch panel wired up my aux lights, and now it seems as though the wires are smashed behind it and it does no fit right.

The other issue is that I have an alarm with a little LED, anywhere I can't drill and mount this easily?

Thank You!

Eric
 

·
Registered
Joined
·
259 Posts
wile13 said:
Hi,

Thanks for everyones help in getting power to the inside of my 2010 Rubicon. Now I have a different issue. I bought the Daystar switch panel wired up my aux lights, and now it seems as though the wires are smashed behind it and it does no fit right.

The other issue is that I have an alarm with a little LED, anywhere I can't drill and mount this easily?

Thank You!

Eric
Post pics, it will help with the diagnosis.
 

·
Premium Member
Joined
·
532 Posts
What year is your Jeep? I have an 08 and didn't have any problems with the daystar. I did replace my stock shifter boot so I wouldn't accidentally turn off lights when shifting.
 

Attachments

1 - 3 of 3 Posts
Top