Jeep Wrangler Forum banner

dead jeep.

1414 Views 8 Replies 4 Participants Last post by  mattmason
Ok the starter, and starter switch sylonoid went out on me the funny part to me is also with those two things out nothing turns on all my gages don't come on nor anything else when the key is turned the lights and hazard don't work. I am going threw this jeeps issues I am planning on replacing all fuses and all parts to include the ignition switch as well as the starter and sylonoid as well I could use any advice that's out there.
1 - 1 of 1 Posts

· Registered
Joined
·
4 Posts
Check the wire harness above the parking brake release lever. Mine had worn through and caused a similar problem. It needed hung so it wasn't rubbing the lever and the harness retaped so it stopped rubbing an exposed wire.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top