Jeep Wrangler Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,585 Posts
The way I figured on my 89 was the dome light always has power going to it, the door switches complete the ground when you open the doors, thus turning the dome light on. Same for the roller switch, it completes the ground.

There is no relay, make sure the door switches are clean.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top