Jeep Wrangler Forum banner

drilling into the hard top

2109 Views 2 Replies 3 Participants Last post by  Jerry Bransford
I have a question about drilling hole in the hard top. First, has anyone done it, and second, if I attach eye bolts with the wide fender washers (with rtv between them), do you think it would hold the weight of suspending it? Just trying to build a better mouse trap on removing my hard top.
1 - 3 of 3 Posts

· Knows a couple things...
2004 Wrangler TJ with 42RLE auto trans. F/R lockers, 5.38 gears, Warn Winch, Currie 4" Suspension
Joined
·
50,844 Posts
I drilled holes into mine for a roof rack I used to have and I regret having done that. Once I stopped using the rack, I had holes in the hard top that are hard to patch. Now the patched holes look bad. I wouldn't drill it, I'd just use two 2x4 pieces of wood under it to lift it up and support it while it's off the Jeep.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top