Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 1 of 1 Posts

·
Registered
Joined
·
472 Posts
Discussion Starter · #1 ·
Hey im looking for some infos about my dynatrac balljoints that i just installed! Just need to know if its normal that the cap on the upper doesnt have any preload on it and can be unscrewed by hand? The instrustion that came with the BJs says that they are ready to go but from my research, i found the installation of the rebuild kit which says to tight the cap to 30 ft/lbs.
 
1 - 1 of 1 Posts
Top