Jeep Wrangler Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
362 Posts
Discussion Starter #1
So i installed my electric fan last night (ill put pics up in a few) and have a few ? about this. the first one is where can i put that probe at (2.5 motor)? the other is do i need to run my radiator shroud ? any help would be much appreciated.
 

·
Registered
Joined
·
159 Posts
It matters what kind of probe you have. My jeep has a probe that you push threw the radiator. My son has one that the wire runs inside the top radiator hose and the probe sits inside the hose. I didn't think this method would work without problems of leaking where the wire goes between hose and radiator, but has not been a problem. Both methods have worked.
 

·
Registered
Joined
·
362 Posts
Discussion Starter #4
Mines a copper screw in but im pretty sure it needs grounded to work but thats a good idea just have to ground the pipe.
 

·
Registered
Joined
·
10 Posts
I have the sensor that pushes thru the fins. Works good placed near top of radiator. I have removed shroud and engine cools fine.
 
1 - 5 of 5 Posts
Top