Jeep Wrangler Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
583 Posts
Discussion Starter #1
Well I thought the issue was my new LED tail lights but it isn't. The passenger side running lights are not working at all not just at the tail end. It includes the tail light running light mode, the side marker, and the front turn indicator that is normally lit when the headlights are on. Also related possibly is that the reverse lights are completely out on BOTH sides in the rear. Thoughts? Things to check?

Eric
 

·
Registered
Joined
·
583 Posts
Discussion Starter #2
Dawned on me (feeling stupid) that I hooked up a trailer for the first time the other day and did it while the truck was running...so went looking for fuses and found the fuse for the passenger side prk/run light blown. Replaced it and now the running lights are working. That said I also found 1 fuse labeled "B/U Lights" but it isn't blown so I wonder what else I could check the reverse lights are not working. Is there another fuse or relay or something that I may have popped as well?

Eric
 

·
Registered
Joined
·
26,921 Posts
Reverse light switch on transmission? Broken wire?
 

·
Registered
Joined
·
26,921 Posts
Manual transmission: switch on drivers side rear near the top.
Not sure where it is on the auto. Did you check the reverse light bulbs?
 
1 - 6 of 6 Posts
Top