Jeep Wrangler Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
139 Posts
Discussion Starter · #1 ·
I only did a 2" OME w/1" BL, but the brake lines look like they're pretty well maxed out.

JKS makes a set, but says for 4-6" lifts. If I route the lines so they are not dangling/hanging, shouldn't I be allright? If that's the case, suggestions on where to route them would be appreciated.
 

· Knows a couple things...
2004 Wrangler TJ, 42RLE auto trans. F/R lockers, 5.38 gears, Warn Winch, Currie 4" Suspension
Joined
·
50,061 Posts
With only a 2" suspension lift, you're nowhere near needing extended brake lines yet. :)
 

· Registered
Joined
·
5,112 Posts
i´ve a 2" BL and (in some days) a 2.5" OME suspension.
now with the smaller 2" BB the brake lines are to short.
i lifted the TJs front without sway bar and links and the passengers side came down about 3" more because the brake lines were to short.
thats why i ordered the goosridge stainless steel brake lines for 1-4" lift.
in the rear the brake line is long enough. but i will also replace it wirth a SS brake line.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top