Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 5 of 5 Posts

·
Registered
Joined
·
11 Posts
ba said:
i have done just that but there are at least 2 per flare that are not accessible and are almost a rivet style nut.
You mean the two front flares i guess, the 2 nuts below..
Had the same problem, I bent them so I could get a small plyer in between the fender and the body to keep it from spinning.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
the flares are off the nuts that were not accessable are called
rivet nuts . I had to grind & drill them out. found a tool called
a thead-setter and Klik rivet-nuts.
 
1 - 5 of 5 Posts
Top