Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 6 of 6 Posts

·
Registered
Joined
·
222 Posts
Discussion Starter · #1 ·

·
Registered
Joined
·
70 Posts
You can get the parts to rebuild that Spicer CV, you'll need a new centering kit and two Ujoints. Most driveline shops will have the parts you need or they can do it for you.
 

·
Registered
Joined
·
222 Posts
Discussion Starter · #3 ·
You can get the parts to rebuild that Spicer CV, you'll need a new centering kit and two Ujoints. Most driveline shops will have the parts you need or they can do it for you.
Yeah but did you see the actual ball on the driveshaft that was messed up also
 

·
Registered
Joined
·
721 Posts
That ball is supposed to be in the centering yoke that's shown in the first few pics.

You might be able to break it free.

Provided that it comes off clean, you're just in for a new centering yoke, though you'll want a new grease seal too.
 

·
Registered
Joined
·
721 Posts
Here's a pick from Stu's site


Notice the post that sticks out of the center? That's what your ball is stuck on right now.
 

·
Registered
Joined
·
222 Posts
Discussion Starter · #6 ·
Yea i just went on google and saw that the ball wasnt supposed to be on it still. L ol it was on there good. Thanks for the help
 
1 - 6 of 6 Posts
Top