[Welder89]

Anybody have some good ways to mount a safety flag on a stock bumpered JK/JKU? Heading up to Silver Lake Sand dunes for the first time this Memorial weekend. The flag must be mounted to the front of the vehicle. I was thinking of using square U bolts to the front tow hooks but I can't find any small enough.

 

[Mike-D]

Every store in the area sells a variety of mounts.

 

[Welder89]

Every store in the area sells a variety of mounts.

What's your setup? I would like to get it squared away before I get there if possible.

 

[Moonrider]

Most mounts that sell at the beach require aporoximately 3/8" hole like CB mounts have. I used my CB mount bracket from Teraflex and bought quick disconnect mount at the beach that was about $40.

 

[Mike-D]

What's your setup? I would like to get it squared away before I get there if possible.

I have an aftermarket bumper with a light tap I drilled out a bit to fit a flag.

The stores in the area carry pretty much exactly what you describe.

 

[Welder89]

Ok thanks for the info.