[Twt_74]

04 Willys edition. How do the return line and other lines come apart so I can drop the tank for the new skid? One of them is easy push the tab in and pull. The other two I can't get em to release/move or even jiggle. I also need to completely remove the tank to tend to some rust from the po screwing something to the tub inside. Por 15 is the way to go there.
Please help

 

[willysmb]

http://www.youtube.com/watch?v=0GtgB1sSEmQ

Check out this video from Rokmen on repolacing gas tank skid including removing the gaslines

 

[DevilDogDoc]

The vent line on mine just slips on the hard line. No clamp or nothing. Try grabbing the line with pliers and twisting gently

 

[Twt_74]

Thanks y'all. See if I can get it done tomorrow