Jeep Wrangler Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
I have no dash lights and thanks to reading some old posts I have narrowed it down to the fuse panel. I have power to the panel but not to the dash, but i do have continuity from the panel to the dash so it has to be at the fuse. I ohm’ed the fuse and it is good and i even replaced it. So I’m thinking corrosion. I would like to remove the panel to clean it out but can’t seem to find any info on how to. any help would be useful
 

·
Premium Member
Joined
·
10,093 Posts
Just nuts and bolts. Take a picture or two for reference and take it out and clean it up.
 
1 - 3 of 3 Posts
Top