Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
1 - 5 of 5 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
I found some gears nip on craigslist cheap so I had to buy them. I got frt. and rear Superior 4.56's for my d30 and 35 with the bearing and instal kits for $200 I found a guy to install them at a good price too. I see all the horror stories about the d35's but Im gonna run it anyway cause thats what I have. I dont mind spending a few bucks to beef it up with axles or a locker but I dont know what to get. Lmk what you think would be the best route for the money. I have about 800 I could spend on it if need be. thanks
 

·
Registered
Joined
·
8,402 Posts
I personally think Chromoly axle shafts are a good thing to have.
 

·
Registered
Joined
·
304 Posts
If you have the money and you are going to be in there it wouldn't hurt to throw a locker up front and some chromoly axles in the rear. My front lockright was 280 and my alloy USA axles where 250. Throw a true track in the rear for 400. And be done.
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #4 ·
Thomas302 said:
If you have the money and you are going to be in there it wouldn't hurt to throw a locker up front and some chromoly axles in the rear. My front lockright was 280 and my alloy USA axles where 250. Throw a true track in the rear for 400. And be done.
Where is the best place to buy this stuff?
 

·
Registered
Joined
·
304 Posts
krazykeith said:
Where is the best place to buy this stuff?
Look at 4x4 group buy and also search google shopping. I just kept searching till I found the best price on what I was looking for.
 
1 - 5 of 5 Posts
Top