Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 2 of 2 Posts

·
Registered
Joined
·
79 Posts
Discussion Starter · #1 ·
My 95 yj with the 4.0 and 5 spd isnt shifting very well. I find it a hard to get into first gear when moving, like i mean i have to be almost stopped or it wont go. At take off the clutch feels good but when shifting into second gear it grinds, i have the clutch all the way in and it comes out of first good but just grinds going into second, u can hear it and feel it in the sifter. It also seems to be grinding a little bit going into third gear. its got about a 3 inch lift on it. Are these signs of my master cylinder going or is this a tranny problem?
 

·
Registered
Joined
·
988 Posts
I'd say tranny syncros are going bad and your master cylinder. Is your slave cylinder good?
 
1 - 2 of 2 Posts
Top