Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 2 of 2 Posts

·
Registered
Joined
·
208 Posts
Discussion Starter · #1 ·
Have purchased led's which have a turn signal and white halo. I see a lot of JL's have the halos as their DRL's (up here in Canada). When I plug in my led lights the headlights, at 50%, are the drl's. Actually it's funny as when I start the jeep only the white halos turn on. It's when I put it in reverse or drive that the headlights turn on.

So what I would like to do is have the halos as my drl's and the headlights off until the auto headlight sensor turns the headlights on at night.

Is there a wire in the light harness that controls the drl's of the headlights. My thoughts are I could re wire this to the halos.

I don't want to spend money having to go to the dealership and have them flashed off the drl's which I don't think the would do in Canada.

Any help would be appreciated

Cheers
Al
Calgary
 

·
Registered
Joined
·
305 Posts
In my '08 JK, I just tapped a fuse for accessory power to run the DRL half halos on my JWS ones, since I had nothing else to connect to.
 
1 - 2 of 2 Posts
Top