Jeep Wrangler Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I just received a new hard top for my 2008 JK from the dealership, which is designed for the newer 2011+ JK. Everything I've read (including the accompanying instructions) says that this top should work fine with my JK so long as I relocate the center tie-down bracket three inches to the left.

The problem I've encountered is that the latches on the left and right sides of the windshield do not seem to meet up properly with the loops they're supposed to grab no matter how I adjust the panels (i.e. the attached image).

Has anybody else encountered this issue? Is there an easy fix? Thanks!
 

Attachments

·
Registered
Joined
·
198 Posts
I'm interested to hear what others have to say on this too. I have a 2011 and purchased it new. My passenger side latch is the same way. Not as far off as your picture but still much different than the drivers side latch which seems to line up like it should. I've never had any issues or leaks from it.
 
1 - 2 of 2 Posts
Top