Jeep Wrangler Forum banner
1 - 1 of 1 Posts

· Premium Member
Joined
·
10,093 Posts
Continuity on the wires just told you that the brushes of the motor were contacting the communtator and a complete path was there. Good motor. Why the wire melted wrong motor, drawing too many amps maybe to ground you will have to check the integrity of the wiring and maybe the motor was bad. Tough question.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top