Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 11 of 11 Posts

·
Premium Member
Joined
·
2,940 Posts
Discussion Starter · #1 ·
Please look at this pieces and help me identify whats missing for the ST install.
Look like I am missing a rear door frame and header?
Hardware appears to all be here.
 

Attachments

·
Premium Member
Joined
·
2,940 Posts
Discussion Starter · #3 ·
I'm not seeing the brackets that mount on the roll bar unless they are already installed.
Yep, missing. Unless buried inside the top that I have yet to unroll.
 

·
Premium Member
Joined
·
554 Posts
Yep, missing. Unless buried inside the top that I have yet to unroll.
Ok if what is pictured is all you have then yes things are missing. Check below.



image-3670718194.jpg



image-1625016771.jpg



image-636895871.jpg



image-2948080482.jpg



image-3925617717.jpg
 

·
Premium Member
Joined
·
554 Posts
I'm not seeing the rear brackets that mount on the roll bar unless they are already installed.
Should be installed, his pic is the middle of the top. Those brackets aren't removable, well you know what I mean
 

·
Premium Member
Joined
·
554 Posts
They don't come on hard top models. I just had to buy a pair from the dealer to put the soft top on mine.
No it comes with the top



image-334723410.jpg

It attaches to the roll bar with this bracket and 2 screws
 

·
Premium Member
Joined
·
554 Posts
Yes. That's the bracket you said wasn't removable.
It is with Allen keys I think. I thought they were rivets. Mine came with them attached
 

·
Premium Member
Joined
·
2,940 Posts
Discussion Starter · #11 ·
I have those hand screws. so looks like I am missing the driver front surround and rear brackets with screws.
 
1 - 11 of 11 Posts
Top