Jeep Wrangler Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
113 Posts
Discussion Starter · #1 ·
I lost the castlenut for the draglink where it attachs to the pitman arm. So i wanna try and find another one at the hardware store but need to know what thread it is. I dunn if anyone else has encountered this.
 

·
Mostly old school..!
Joined
·
12,148 Posts
I don't know what it is, but you could measure the diameter, and count how many threads there are in an inch. Then go to the hardware store and find a bolt the same size and thread pitch, and that would give you the size of the nut.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top