Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 20 of 47 Posts

·
Registered
Joined
·
85 Posts
Discussion Starter · #1 ·
I've read several previous threads re: the change to enable you to use the fog lights with the high beam head lights. Two questions:
1. can you still use the fog lights w/low beam head lights
2. can you use the high beam head lights w/o the fog lights
Thanks
 

·
Registered
Joined
·
312 Posts
Yes on both questions. I did it and it's great. You won't regret it. Took about 30 seconds to do.
 

·
Registered
Joined
·
413 Posts
I there a link to doing the mod?
 

·
Registered
Joined
·
3,396 Posts
I think its 00 and up or 01 and up... but the mod is the same, just a different location... I did it on mine a couple of weeks back.
 

·
Registered
Joined
·
413 Posts
Question, just looked at mine and was wondering, if I bend the pin 90 degrees, how does it fit back in there. There is another relay right next to it. Mine is an 02.
 

·
Registered
Joined
·
3,396 Posts
You have to bend it around where it comes up next to the housing to fit between the relays
 

·
Registered
Joined
·
312 Posts
I couldn't get my to bend around very easily, so I just bent it back and forth 'til it broke off. No problems thus far.
 

·
Registered
Joined
·
413 Posts
Got ya, thx
 

·
Registered
Joined
·
413 Posts
Done, took 2 minutes.... literally. Thanks again.
 
1 - 20 of 47 Posts
Top