Jeep Wrangler Forum banner
  • Hey everyone! Enter your ride HERE to be a part of JUNE's Ride of the Month Challenge!

1 - 4 of 4 Posts

·
Registered
Joined
·
174 Posts
Discussion Starter · #1 ·
I can see the plate with the degrees on it but I have no idea how to see the mark on the pulley. Any one have any ideas?
The view to the pulley is blocked by the belt.
 

·
Registered
Joined
·
712 Posts
On vehicles that I haven't been able to see the timing mark on the pulley I use a piece of chalk and mark it by feel. Once you have located the notch, go over it with the chalk several times then wipe the area with a rag. That will take off the excess chalk but the chalk will stay in the notch and that is what you will see with the timing light. Hope this helps.
 
1 - 4 of 4 Posts
Top