How i can tell the type of lift?
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Cylinder 4 Misfire
JK Tech ForumHi guys my name is Mason Luna this is my first time posting and asking for help on the forum. I'm going to cut right to the chase I have a 2008 Jeep Wrangler Unlimited V6 and I have a Cylinder 4 misfire and for the life of me I cannot figure it out why it keeps misfiring, I have changed the...- 0
- 172
-
MasonLuna47 · updated
-
Oem tpms not working on new wheels/tires?
JK Tech Forumhey guys. I recently put new wheels and tires on the JKU and kept my oem sensors in the new combo. I drove home with the old combo which had no sensors in it and i got no lights. Then later that week i put the new combo on and when i turned on my JSCAN only one sensor was reading tpms pressure...- 0
- 211
-
Broken rock slider bolts
JK Tech ForumI broke off not one but two seized bolts from my rock sliders...... What method is best for removing them so I can replace with new bolts in the frame body? My rock sliders are like new, but I’m at the point that buying new ones and paying the shop to install may be my best option if I...- 2
- 284
-
Beatrice · updated
-
Falcon 3.3 question
JK Tech ForumHi, I read somewhere (probably on JL forum) that the 3.3 are really long and they ride a little harsh. Someone had suggested for JKu to get the 2 dr version for softer ride and at my 3.5 lift to get the 1.5-2.5 in Falcons instead of the 3-4.5in Falcons since they are so long. Has anyone done this?- 8
- 341
-
txjeep15 · updated
-
JK Shock Change - No Jack Method
JK Tech ForumBackground: I am new to Jeeps in general and WranglerForum as well. I am also fortunate enough to have a nice shop at my home where I can easily work, I also have many of the tools necessary to do everything on our JK or my other toys. However, since this is our first jeep and I know a lot of...- 8
- 15K
Join now to ask and comment!