Jeep Wrangler Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
387 Posts
Discussion Starter · #1 ·
I just lifted my jeep with a 3.5" MC kit and the shocks are now relocated on the rear. Well now my tail pipe is rubbing the shock. I was curious what guys were doing with their tail pipes. I thought about terminating it right before the rear after the muffler. Problem with that is we have emissions inspection here in NJ. My next thought was having it brought out right before the rear tire. Or I could just have it rebent and exit in the stock location.

Who did what?

Thanks
 

·
Registered
Joined
·
5,048 Posts
I had a similar issue, I just went to a local exhaust specialist and he bent it just enough in a couple areas to clear the shock. I probably have an inch or so of clearance.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top