Jeep Wrangler Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
583 Posts
Discussion Starter #1
Hey guys..Got some of the laser etched Contura V actuators for my sPod panel and before I break one I thought I would drop a note and see if someone can tell me how to pop the stock ones off and get the new ones on??

Any insight would be appreciated.

Eric
 

·
Registered
Joined
·
88 Posts
There is a little tool that makes it easier - but you can just pop them off and push the new ones on.
 

·
Registered
Joined
·
583 Posts
Discussion Starter #4
Actually he was dead on...I just used a small flat head screw driver and stuck it behind each side or the switch and twisted it slightly and each side popped right up. The new one just pushed right on. Simple. Thanks guys.

Eric
 

·
Registered
Joined
·
518 Posts
Yup. Mine showed up today. OTRATTW sent a little tool you just slip behind the original rocker and it just pops off. Press the new on on straight in the middle and bingo.

So yeah, it's super easy, but now there's details on what is required to pop them off. :)
 
1 - 5 of 5 Posts
Top