Jeep Wrangler Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
61 Posts
Discussion Starter #1
Ok so I need to change my trany mount with out dropping the skid pan what's the easiest way to get it out with out taking the skid off
 

·
Registered
Joined
·
3,547 Posts
What transmission do you have?

And its going to be easier to remove the skid plate.
 

·
Registered
Joined
·
61 Posts
Discussion Starter #3
Idk what's trans it's a 4 cylinder 5 speed 97 and my gram is rusty and I'm afraid the welds will brake on the inside of the frame for the bolts to the skid so can't drop skid
 

·
Registered
Joined
·
265 Posts
Hit it with a lot of pb blaster for a while. Seriously, you're going to need to drop the skid eventually and the rust isn't just going to go away. PB blast the ever-living crap out of the bolts for a week and it shouldn't be an issue.
 

·
Registered
Joined
·
5,291 Posts
I did mine without removing the skid, it was a pain in the ass... I can't remember if I had a MML at the time or not
 

·
Registered
Joined
·
61 Posts
Discussion Starter #8
I did it with out taking the pan off it would if been easier to pull the pan but it wasent to hard to do it with out pulling off the pan
 
1 - 8 of 8 Posts
Top