Jeep Wrangler Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
I have a TJ X and I want to add a quick disconnect system for the sway bar. I've seen some pictures on the forum but nothing that is totally comprehensible. I want to do the clevis pin set up but I am wondering what kind of supplies I need so I can make a list to take a trip to the hardware store. This mod would really help just help me get started.
 

·
Registered
Joined
·
8,402 Posts
This is how I did mine....used the http://4x4xplor.com/homediscos.html guide, but I think I used a total of 6 washers. I also tack welded one of the grade 8 washers to the head of the clevis pin so it shouldn't wear as quick.


Connected



Disconnected (I welded a tab to the frame)

 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top