Jeep Wrangler Forum banner

Hp 30

878 Views 8 Replies 3 Participants Last post by  CJS98TJ
So I found a hp d30 on Cl no vac disco seems good besides bent and cracked lower ca mount but I can replace a reweld it. 3:07 ratio. I have 4:10 now but when I regear I'm going to be doing 4:88 front and rear and figured I'd just swap in the hp when it was time to regear because I'm starting a 8.8 swap soon too.... Anyways he said he'd take 70$ for it. Good deal?
1 - 9 of 9 Posts
Forgot to add its off a 96 cherokee
In my area, Ive seen axles go for $200+ on craigslist.
I was surprised when I saw the price too especially in California where I am. And I believe that since I have stock 4:10 I can use my carrier when I regear it to 4:88. Any info on that because I am not sure
My buddy talked him down to 60$ am he's going to buy it for me and I will just pay him when I get next paycheck.
if you just happen to not need the 4.1 out of your front anymore.... Im doing pretty much the same thing. I just picked up my 8.8 already geared 4.1
obidya said:
if you just happen to not need the 4.1 out of your front anymore.... Im doing pretty much the same thing. I just picked up my 8.8 already geared 4.1
I don't know the exactly time I'm regearing the axle will go in once I regear. Then I'll have the 4:10s ring and pinion for Lp d30 and 8.8 for sale soon after
Im a LONG time away from actual work myself. Who knows it could work out. lol
Definitely. First things first will be my rear suspension and rear end. I believe all I need left is a few tabs and some tubing for my long arms in the rear need to buy some .35 wire too.
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top