Jeep Wrangler Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a 91 Yj that has been fabed and is running a 4.5" Procomp short arm lift kit on coils not leafs. I've been getting severe death wobble and yesterday I installed a rugged ridge heavy duty crossover steering system and a new Procomp steering dampener. I neglected to re-tighten the track bar bolt after installing and I still got death wobble because my power steering pump was failing (getting new one) but the lower bolt in the track bar fell out. Where can I find one?
 

·
Registered
Joined
·
461 Posts
Try calling the local dealerships.. Or look up the size online and go to a local fastener or hardware store and look for it in a grade 8.. Good luck
 

·
Registered
Joined
·
311 Posts
Late to the game, but if a Grade 8 or 10.9 is needed, one of the three area Ace Hardwares is your best bet. Their bolt and pin aisle is truly amazing compared to any other I have tried in the area.
 
1 - 3 of 3 Posts
Top