Jeep Wrangler Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hello,

I need your help to wire the harness to Ruggid Ridge switch pod.

I have done everything except connecting it to the switches.

I am not sure which wire is the ground, positive, or the one goes to the light bar.

Also I got confused with these cables but let me explain what I have understood.

- One cable goes inside the cabin and to be connected to the switch pod.
- Three cables will be connected to each button as the following: one to ground the button, one to the positive coming from the main harness and the last one to the light bar. Please correct me if i'm wrong.

Now, there is another cables other than the one inserted into the cabin. How do I deal with it?


Regards,
Hazim
 
1 - 1 of 1 Posts
Top